SPONSORS
2024 ICRBE EXPO |
ATC AMP843 or AMJ843
Posted by:
Jeff McInnish
(---.sub-174-237-8.myvzw.com)
Date: April 16, 2020 01:51AM
I am looking for some old ATC AMP843 7/8-14 or AMJ 843 blanks. Any help would be appreciated! Re: ATC AMP843 or AMJ843
Posted by:
Don @ American Tackle
(---)
Date: April 16, 2020 09:02AM
Good morning Jeff,
Those are still available but with new numbers... amp843 is now ma-p7/8-14 amsj843 is now ma-sj7/8-14 Any of our distributors can get those to you asap STAY SAFE _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: ATC AMP843 or AMJ843
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: April 16, 2020 10:39AM
How about the ESW76H? They make great Bunker Spoon Rods. Dennis J. Danku (Sayreville,NJ) Edited 1 time(s). Last edit at 04/16/2020 10:40AM by Dennis Danku. Re: ATC AMP843 or AMJ843
Posted by:
Don @ American Tackle
(---)
Date: April 16, 2020 11:37AM
Dennis Danku Wrote:
------------------------------------------------------- > How about the ESW76H? They make great Bunker Spoon > Rods. I am not familiar with that one... is that Matrix? Sounds like it could be an old classic or viper... email me the specs and I may be able to help you with a newer model _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: ATC AMP843 or AMJ843
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: April 16, 2020 12:49PM
No , it's an old AMTEK model, Eglass, with a fast taper,7'6". Used to extend them with a Tuff Butt and the finished rod would be 9'. Dennis J. Danku (Sayreville,NJ) Re: ATC AMP843 or AMJ843
Posted by:
Roger Templon
(---.paw.cpe.atlanticbb.net)
Date: April 17, 2020 01:02PM
Jeff
If it helps at all, I have a unused AVP842-BL (viper series, popping, 1/4 - 1/2) blank in my blank stash! Email me if you have any more questions. Rog Re: ATC AMP843 or AMJ843
Posted by:
Don @ American Tackle
(---)
Date: April 17, 2020 02:29PM
Roger Templon Wrote:
------------------------------------------------------- > Jeff > > If it helps at all, I have a unused AVP842-BL > (viper series, popping, 1/4 - 1/2) blank in my > blank stash! Email me if you have any more > questions. > > Rog Roger.. is that the only one you have? Email me... I may know someone interested in it. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: ATC AMP843 or AMJ843
Posted by:
Roger Templon
(---.paw.cpe.atlanticbb.net)
Date: April 20, 2020 04:10PM
Don
It is the only one that I have, and I think I'm just going to build it and use it for PA river smallies! I think it will make a nice rod! Rog Sorry, only registered users may post in this forum.
|