SPONSORS
2024 ICRBE EXPO |
><> G2 SEAT GLUE UP WITH NO MESS!!! <><
Posted by:
Don @ American Tackle
(---)
Date: April 07, 2020 01:44PM
There has been discussion about the best way to glue up the American Tackle G2 seats the easiest way.
This is how we do it.... [youtu.be] G2 Reel Seats - Tomorrow's Technology, Available Today Ergonomic Spinning and Casting designs Available in 1 & 2 piece collections Exclusive Uni-Hood and Uni-Lock Hood Cork and EVA fitted grips available 1K, 3K, or Bushido carbon insert options [www.americantackle.us] _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Edited 1 time(s). Last edit at 04/07/2020 02:18PM by Don @ American Tackle. Re: ><> G2 SEAT GLUE UP WITH NO MESS!!! <><
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: April 07, 2020 04:54PM
Don, much cleaner than what I do, but I'm concerned that you get only about a half inch of epoxy at each end. Must be enough or you wouldn't recommend it, but can you elaborate on why we don't need more area glued? thanks, Mick Re: ><> G2 SEAT GLUE UP WITH NO MESS!!! <><
Posted by:
Don @ American Tackle
(---)
Date: April 07, 2020 05:35PM
You glue the tube hitting any and all area that you can... everything in between the ends (the cut outs) does not make contact with the tube (or larger blank).
The gluing areas will be different depending on the seat model. The video will make more sense when you have one in your hand. The arbors that you place on the ends of the tube will be your main contact between the blank and the seat. Michael Danek Wrote: ------------------------------------------------------- > Don, much cleaner than what I do, but I'm > concerned that you get only about a half inch of > epoxy at each end. Must be enough or you wouldn't > recommend it, but can you elaborate on why we > don't need more area glued? thanks, Mick _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Sorry, only registered users may post in this forum.
|