SPONSORS
2024 ICRBE EXPO |
Re: Spiffy DIY set up!
Posted by:
John DeMartini
(---)
Date: March 22, 2020 09:07AM
Excellent! Just goes to show what determination, desire and craftsmanship can produce.
Thanks David! Thanks Peter! Re: Spiffy DIY set up!
Posted by:
david taylor
(---)
Date: March 22, 2020 01:57PM
Just to be clear, I had nothing to do with that ingenuity only found it on You Tube. Re: Spiffy DIY set up!
Posted by:
Jeffrey Mullendore
(12.235.93.---)
Date: March 23, 2020 09:56AM
David,
Where did you find the wheels (wood with rubber) on the support end of your setup...? Mully Re: Spiffy DIY set up!
Posted by:
david taylor
(---)
Date: March 23, 2020 08:02PM
Again, I just found the video on You Tube. I would go there to ask the author. I hope he is a member of this forum or joins. Re: Spiffy DIY set up!
Posted by:
Phil Ewanicki
(---.res.spectrum.com)
Date: March 26, 2020 10:20AM
I used the nylon ball-bearing roller wheels from the top track of a trashed glass shower door on a bathtub. These wheels have a groove around their circumference which ride in the aluminum track. If you can obtain some of these wheels you will find a certain size neoprene "O Ring" will stretch and fit beautifully in this track. Secured by bolts and nuts, side-by-side and overlapped these wheels have worked perfectly for many years for me. Sorry, only registered users may post in this forum.
|