I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
Rodgeeks
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

ROD BLANK IDENTIFICATION
Posted by: Steven Barstis (---.desm.qwest.net)
Date: March 20, 2020 12:09PM

I have recently acquired a bundle of rod blanks for an a master builder who since past . I have identified all of them but two. The only marking on the rods are the numbers FL 108 5/2 . They are eight foot long blanks.I can not find any manufacture of these blanks. Can anyone help me with this ?

Options: ReplyQuote
Re: ROD BLANK IDENTIFICATION
Posted by: Steven Barstis (---.desm.qwest.net)
Date: March 20, 2020 08:00PM

Does a Fenwick Fly Rod ring any bells ?? 9 footer

Options: ReplyQuote
Re: ROD BLANK IDENTIFICATION
Posted by: Tom Kirkman (Moderator)
Date: March 20, 2020 08:15PM

Doesn't appear to match those numbers.

.............

Options: ReplyQuote
Re: ROD BLANK IDENTIFICATION
Posted by: Robert A. Guist (---.inf6.spectrum.com)
Date: March 21, 2020 10:14AM

Hello All.

Could they be CUI, I have 2 FL-090's they are 1 piece 9' / 20-40# / 1.10 butt / 12 Tip?


They are the only FL part#'s I have listed with my blanks.


Good Luck.


Tight Wraps & Tighter Lines.

Bob,

New Bern, NC.

Options: ReplyQuote
Re: ROD BLANK IDENTIFICATION
Posted by: Steven Barstis (---.desm.qwest.net)
Date: March 21, 2020 10:39PM

I'll look into it !, Thanks

Options: ReplyQuote
Re: ROD BLANK IDENTIFICATION
Posted by: Norman Miller (---.lightspeed.jcsnms.sbcglobal.net)
Date: March 21, 2020 10:50PM

Lamiglas?
Norm

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster