SPONSORS
2024 ICRBE EXPO |
ROD BLANK IDENTIFICATION
Posted by:
Steven Barstis
(---.desm.qwest.net)
Date: March 20, 2020 12:09PM
I have recently acquired a bundle of rod blanks for an a master builder who since past . I have identified all of them but two. The only marking on the rods are the numbers FL 108 5/2 . They are eight foot long blanks.I can not find any manufacture of these blanks. Can anyone help me with this ? Re: ROD BLANK IDENTIFICATION
Posted by:
Steven Barstis
(---.desm.qwest.net)
Date: March 20, 2020 08:00PM
Does a Fenwick Fly Rod ring any bells ?? 9 footer Re: ROD BLANK IDENTIFICATION
Posted by:
Tom Kirkman
(Moderator)
Date: March 20, 2020 08:15PM
Doesn't appear to match those numbers.
............. Re: ROD BLANK IDENTIFICATION
Posted by:
Robert A. Guist
(---.inf6.spectrum.com)
Date: March 21, 2020 10:14AM
Hello All.
Could they be CUI, I have 2 FL-090's they are 1 piece 9' / 20-40# / 1.10 butt / 12 Tip? They are the only FL part#'s I have listed with my blanks. Good Luck. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: ROD BLANK IDENTIFICATION
Posted by:
Steven Barstis
(---.desm.qwest.net)
Date: March 21, 2020 10:39PM
I'll look into it !, Thanks Re: ROD BLANK IDENTIFICATION
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: March 21, 2020 10:50PM
Lamiglas?
Norm Sorry, only registered users may post in this forum.
|