I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

About to build my first CTS
Posted by: Robert Ford (---)
Date: March 11, 2020 10:24PM

Ok so I have a rod in the works I wanna build ,and I have been wanting to give a CTS blank a shot. I plan on building an 8 foot 2 piece rod ,in one of the blue colors. The fishery will be for schoolie stripers and halibut from the beach in California,average size fish between 6-10 pounds,and I want to have it be crisp,and have some butt to it. My question is what would be better for fishing smaller sp minnows and live bait rigs,up to once ounce,like a Carolina rig,and the occasional drop shot zoom fluke rig. I was looking at the Air or Jetstream blanks in say 8 foot with an 8-12 rating. Just not sure the differences between blanks. Thank you,again,I am always appreciative of you guys and your wealth of knowledge here. Best on the net!

Options: ReplyQuote
Re: About to build my first CTS
Posted by: roger wilson (---)
Date: March 11, 2020 10:37PM

Robert,
I am not familiar with that style of fishing, but we often catch fish that size on our freshwater lakes using a medium action rod with a 6-10 rating with no issue.

However, I expect that since you are blue water fishing you do want to have a bit extra in case one of th big ones come through?

I don't know the distance you are casting, but if you have to cast a good distance are you better off with a surf style rod that is 10-12 feet in length. As I said, I know zero about your fishing conditions and fishery - just wondering.

Take care

Options: ReplyQuote
Re: About to build my first CTS
Posted by: Robert Ford (---)
Date: March 11, 2020 10:39PM

Upon further inspection I may choose to build an air blank and a jetstream. I think I kinda answered my own question here. I'm excited. I have a feeling these blanks will exceed all expectations.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster