SPONSORS
2024 ICRBE EXPO |
Wonder weaver 2 VizWeave software
Posted by:
Joe Strain
(---.ok.ok.cox.net)
Date: February 26, 2020 05:50PM
Would like to converse with someone that has personal knowledge of subject items Re: Wonder weaver 2 VizWeave software
Posted by:
Jim Upton
(---)
Date: February 27, 2020 12:38PM
You can send me an E-Mail at jandjupton@earthlink.net re: the Wonder Weaver. I invented it. Re: Wonder weaver 2 VizWeave software
Posted by:
Jim Upton
(---)
Date: February 27, 2020 12:38PM
You can send me an E-Mail at jandjupton@earthlink.net re: the Wonder Weaver. I invented it. Re: Wonder weaver 2 VizWeave software
Posted by:
Bill Marchisella
(---)
Date: February 27, 2020 12:43PM
Joe, I suggest you get in contact with Jim Upton for Wonder weave and David Boyle for Visual weave. Re: Wonder weaver 2 VizWeave software
Posted by:
Robert A. Guist
(---.inf6.spectrum.com)
Date: February 27, 2020 04:20PM
Hello All.
Joe, if you want Wonder Weaver 1 or 2 Jim is your man, if you want VisualWeave you need to talk to davidboyle@visualwrap.com. Jim came up with the wonder weaver years ago as a mechanical help to weaving. David Boyle worked with Billy Vivona to create VisualWrap, and VisualWeave came later. Hope this is helpful. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Sorry, only registered users may post in this forum.
|