I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Large bubble in Flexcoat syringe
Posted by: William Giokas (---)
Date: February 22, 2020 05:51AM

How do you get a rather large bubble out of a pre loaded syringe of Flexcoat? My Flexcoat syringe has a large bubble and I wonder how to get it out before I apply it to the rod wraps . The bubble is in the Resin syringe.
Thanks in advance. Bill

Options: ReplyQuote
Re: Large bubble in Flexcoat syringe
Posted by: Ross Pearson (---.dlth.qwest.net)
Date: February 22, 2020 08:15AM

Hold the syringe vertical with the nozzle up and the bubble should float up to the opening where you can push it out with a little pressure on the plunger. You may have to adjust the volumes if they are not equal in both syringes.

Options: ReplyQuote
Re: Large bubble in Flexcoat syringe
Posted by: John DeMartini (---.res.bhn.net)
Date: February 22, 2020 10:29AM

Ross', suggestion is spot on.

I would set the syringe vertical and place it in a warm area, it may take time for the bubble to float to the top.

John

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster