I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

ICRBE
Posted by: Bill Marchisella (12.170.14.---)
Date: February 21, 2020 05:13PM

Just arrived at the hotel- a 759 mile ride from Florida. I saw Tom and Billy at the M C Benton Convention Center. They told me where to get some good barbeque. I plan on seeing some old friends and making some new ones. I'm also going to take advantage of some of the deals. For those of you who couldn't make it, I'll do my best to keep to keep you posted,

Options: ReplyQuote
Re: ICRBE
Posted by: Michael Ward (---)
Date: February 21, 2020 06:59PM

Just past a horde of rod builders in the Marriott Lobby - looked like trouble brewing.... ????

Options: ReplyQuote
Re: ICRBE
Posted by: Tom Kirkman (Moderator)
Date: February 21, 2020 08:56PM

They look like a rough crowd but they're pretty harmless...

.........

Options: ReplyQuote
Re: ICRBE
Posted by: Mark Talmo (---)
Date: February 21, 2020 11:27PM

Thanks, Bill. I wanted to attend but just could not quite swing it. Many of us not attending will be grateful for updates.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!!

Options: ReplyQuote
Re: ICRBE
Posted by: Billy Vivona (12.170.14.---)
Date: February 21, 2020 11:47PM

That big group were The NERBs, we were about to head out to dinner. Should'a said hello. GOod to see you Bill, and your wide and her sister. Hope you enjoyed dinner

Options: ReplyQuote
Re: ICRBE
Posted by: Michael Ward (---)
Date: February 22, 2020 07:51AM

Lol - I I thought as much. Will see y’all today.....

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster