I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Convention transport vehicle
Posted by: roger wilson (---)
Date: February 20, 2020 12:05PM

If you want to insure that a group of folks can get to the convention, here is the vehicle to do it.

[www.rodbuilding.org]

Options: ReplyQuote
Re: Convention transport vehicle
Posted by: Mark Talmo (---)
Date: February 20, 2020 01:12PM

Roger,
We all know you are a great fabricator but you have gone overboard this time!!!

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote
Re: Convention transport vehicle
Posted by: Roger Rierson (---.inf6.spectrum.com)
Date: February 20, 2020 05:12PM

With the snow that's falling here now its perfect vehicle.

Options: ReplyQuote
Re: Convention transport vehicle
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: February 21, 2020 07:27PM

Roger, if the wheels on the bus actually do go round and round, I'd hate to have to listen to the song!

Options: ReplyQuote
Re: Convention transport vehicle
Posted by: roger wilson (---)
Date: February 21, 2020 07:47PM

But, if you have to take a group through a Louisiana swamp, this could be the ticket to accomplish that little task.

Options: ReplyQuote
Re: Convention transport vehicle
Posted by: ron zimmerman (---.tcso.qwest.net)
Date: February 25, 2020 10:21AM

Heres hoping you dont have to go over an Oklahoma Toll road the wheel fees will bankrupt you .



Edited 1 time(s). Last edit at 02/25/2020 10:22AM by ron zimmerman.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster