SPONSORS
2024 ICRBE EXPO |
Things to Shake at the Show
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: February 11, 2020 04:50PM
We have added 4 POINT Blank models that have barely seen the light of day. We will have them at the show next week. Come shake one.
PB801MXF Length: 8ft weight: 2.6oz Lure wt range: 3/16 - 3/4oz. Action: Extra fast (73-degrees) Power: Medium (IP = 687 grams) Tip size: 5.0 Butt diameter: 14.51mm CPB7101XXHM Length: 7ft 10inches weight: 2.0 oz Lure wt range: 1/2 - 2oz. Action: Moderate (63-degrees) Power: Double X Heavy (IP = 1209 grams) Tip size: 7.5 Butt diameter: 14.60mm CPB7101MHM Length: 7ft 10inches weight: 2.5oz Lure wt range: 1/4 - 1 oz. Action: Moderate (64-degrees) Power: Medium Heavy (IP = 771 grams) Tip size: 6.5 Butt diameter: 14.30 mm CPB7101HM Length: 7ft 10 inches weight: 2.6 oz Lure wt range: 3/4 - 1 1/4 oz. Action: Moderate (64-degrees) Power: Heavy (IP = 949 grams) Tip size: 6.5 Butt diameter: 14.0 mm Re: Things to Shake at the Show
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: February 11, 2020 09:15PM
Things to Shake at the Show?
Jim Isings hand will be a good starting point! Look forward to seeing you again Re: Things to Shake at the Show
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: February 12, 2020 09:15AM
Same time, same place, Steve! Re: Things to Shake at the Show
Posted by:
Robert A. Guist
(---.inf6.spectrum.com)
Date: February 27, 2020 04:42PM
Hello Jim.
I won a blank at the reception and on the but it has a sticker that say's "Point Blank CPB7101MHM:7'10" Medium Heavy Moderate" and it came with a sticker that say's "Point Blank CPB7101XXHM 7'10" XX Hvy / Moderate 17-30lb Mono-20-40lb Braid 1-3 oz.Lure Wt." Now the question is which is right? I think it is probably the one on the blank. If it is the one on the blank can you send me a correct sticker? ps. my address is 206 Carolina Pines Blvd. New Bern NC. 28560. Thanks Jim see you next year. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Edited 1 time(s). Last edit at 02/27/2020 04:53PM by Robert A. Guist. Sorry, only registered users may post in this forum.
|