I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Things to Shake at the Show
Posted by: Jim Ising (---.dthn.centurylink.net)
Date: February 11, 2020 04:50PM

We have added 4 POINT Blank models that have barely seen the light of day. We will have them at the show next week. Come shake one.

PB801MXF
Length: 8ft
weight: 2.6oz
Lure wt range: 3/16 - 3/4oz.
Action: Extra fast (73-degrees)
Power: Medium (IP = 687 grams)
Tip size: 5.0
Butt diameter: 14.51mm

CPB7101XXHM
Length: 7ft 10inches
weight: 2.0 oz
Lure wt range: 1/2 - 2oz.
Action: Moderate (63-degrees)
Power: Double X Heavy (IP = 1209 grams)
Tip size: 7.5
Butt diameter: 14.60mm

CPB7101MHM
Length: 7ft 10inches
weight: 2.5oz
Lure wt range: 1/4 - 1 oz.
Action: Moderate (64-degrees)
Power: Medium Heavy (IP = 771 grams)
Tip size: 6.5
Butt diameter: 14.30 mm

CPB7101HM
Length: 7ft 10 inches
weight: 2.6 oz
Lure wt range: 3/4 - 1 1/4 oz.
Action: Moderate (64-degrees)
Power: Heavy (IP = 949 grams)
Tip size: 6.5
Butt diameter: 14.0 mm

Options: ReplyQuote
Re: Things to Shake at the Show
Posted by: Steve Gardner (---.nc.res.rr.com)
Date: February 11, 2020 09:15PM

Things to Shake at the Show?

Jim Isings hand will be a good starting point!
Look forward to seeing you again

Options: ReplyQuote
Re: Things to Shake at the Show
Posted by: Jim Ising (---.dthn.centurylink.net)
Date: February 12, 2020 09:15AM

Same time, same place, Steve!

Options: ReplyQuote
Re: Things to Shake at the Show
Posted by: Robert A. Guist (---.inf6.spectrum.com)
Date: February 27, 2020 04:42PM

Hello Jim.

I won a blank at the reception and on the but it has a sticker that say's "Point Blank CPB7101MHM:7'10" Medium Heavy Moderate" and it came with a sticker that say's "Point Blank CPB7101XXHM 7'10" XX Hvy / Moderate 17-30lb Mono-20-40lb Braid
1-3 oz.Lure Wt."

Now the question is which is right?

I think it is probably the one on the blank.

If it is the one on the blank can you send me a correct sticker?

ps. my address is 206 Carolina Pines Blvd. New Bern NC. 28560.

Thanks Jim see you next year.


Tight Wraps & Tighter Lines.

Bob,

New Bern, NC.



Edited 1 time(s). Last edit at 02/27/2020 04:53PM by Robert A. Guist.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster