SPONSORS
2024 ICRBE EXPO |
Stencils
Posted by:
ron zimmerman
(---.tcso.qwest.net)
Date: December 28, 2019 01:34AM
I'm looking for small stencils to trace onto cork handles . They can be almost anything fishing related . I have looked everywhere I can think of but to no avail . Any ideas . As always , TIA Re: Stencils
Posted by:
brian rossi
(---.hsd1.ca.comcast.net)
Date: December 28, 2019 11:32AM
I have used graphite transfer paper to trace images onto cork handles. If you have a printer you can pretty much put anything you want onto a handle that way. Re: Stencils
Posted by:
ron zimmerman
(---.tcso.qwest.net)
Date: December 28, 2019 04:05PM
Thank you Brian . Does the graphite come off after you burn it ? Edited 1 time(s). Last edit at 12/28/2019 04:07PM by ron zimmerman. Re: Stencils
Posted by:
brian rossi
(---)
Date: December 28, 2019 05:19PM
You're burning on the line left by the graphite so you're burning it off along with the cork under it.. As long as you make the line nice and thin you'll never know it was there. Re: Stencils
Posted by:
Jim Upton
(---)
Date: December 29, 2019 12:19PM
You can use a program called "Rapid Resizer" and make a stencil from any picture you want. try going to rapidresizer.com you can use part of the program free. Re: Stencils
Posted by:
Jim Upton
(---)
Date: December 29, 2019 12:20PM
You can use a program called "Rapid Resizer" and make a stencil from any picture you want. Try going to rapidresizer.com you can use part of the program free. You can see examples in my gallery. Edited 1 time(s). Last edit at 12/29/2019 12:23PM by Jim Upton. Sorry, only registered users may post in this forum.
|