nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Posted by: Brad Kimbrell (---)
Date: December 21, 2019 12:02PM

I’m about to buy a multi rod dryer and need some opinions. I’ve narrowed it down to the CRB vertical wall mount four rod dryer and the Rodsmith quad rod dryer. Pros or cons on both?

Options: ReplyQuote
Re: Dryers?
Posted by: Bill Sidney (---.gci.net)
Date: December 21, 2019 01:20PM

I have not used one , but it sure looks good an also save floor space ,

William Sidney

Options: ReplyQuote
Re: Dryers?
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: December 21, 2019 03:23PM

I would go with the Pac Bay and check with Utmost before buying.

Options: ReplyQuote
Re: Dryers?
Posted by: roger wilson (---)
Date: December 21, 2019 04:59PM

If you like, you can always make a dryer.

Otherwise, the driers that you have mentioned will all work fine.

Options: ReplyQuote
Re: Dryers?
Posted by: John Cates (---)
Date: December 24, 2019 01:41AM

OEM quality that lasts, none compare with Flex Coat


Flex Coat Company
Professional Rod Building Supplies

Options: ReplyQuote

Sorry, only registered users may post in this forum.