I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

WEAVE
Posted by: Jeffrey D Rennert (---)
Date: November 22, 2019 08:04AM

Has anyone tried weaving over thread work? Thank you. It's not easy being me at times.

Options: ReplyQuote
Re: WEAVE
Posted by: Ken Brown 2 (---.229.194.3.res-cmts.sm.ptd.net)
Date: November 22, 2019 08:11AM

I have not. I would assume many replies here. My thought would be to have your base thread work laid down. Then add a thin layer of epoxy or CP. After that application is cured, then add your weave. This will help prevent any slippage of the weave into the base thread work.

Options: ReplyQuote
Re: WEAVE
Posted by: Jim Upton (---)
Date: November 22, 2019 12:27PM

Yes, Just finish the under work first. Remember to try and center the weave on the pattern of the under work so it looks balanced when finished.

Options: ReplyQuote
Re: WEAVE
Posted by: Jim Upton (---)
Date: November 22, 2019 12:27PM

Yes, Just finish the under work first. Remember to try and center the weave on the pattern of the under work so it looks balanced when finished.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster