I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Looking for K2 683
Posted by: Roberto Matsuoka (---.virtua.com.br)
Date: November 16, 2019 06:18PM

Hi,

Does anyone know where can I find a Phenix K2 683 that could be delivered to Irving Texas before 29th NOVEMBER. I have searched some sites haven't found it yet. Most stores back order it to Phenix that then takes a while to ship it.

What you guys would recomend if I don't find this blank available.

Thanks in advance



Edited 1 time(s). Last edit at 11/16/2019 09:53PM by Roberto Matsuoka.

Options: ReplyQuote
Re: Looking for K2 683
Posted by: Jim Ising (---.dthn.centurylink.net)
Date: November 18, 2019 12:23PM

PB691MXF POINT Blank
Length: 6 ft 9 inches
Action Angle: XF •67-degrees (RDA) • 76-degrees (CCS)
Power: Med / 440gr (RDA) • ERN 20.7 (CCS)
Weight: 1.76oz.
Butt Dia: 14.06 mm
Tip Size: 1.81mm (5.0)
Lure Wt: 1/8 to 5/8oz
Sugg Line Wt: 8-14 mono
10-15lb braid

PB691MLXF
Length: 6 ft 9 inches
Action Angle: XF • 68-degrees (RDA) • 77-degrees (CCS)
Power: Med Light / 380gr (RDA) • ERN 18.2 (CCS)
Weight: 1.58oz.
Butt Dia: 13.97 mm
Tip Size: 1.7mm (5.0)
Lure Wt: 1/16 to 3/8oz
Sugg Line Wt: 6-12 mono
10-15lb braid

Options: ReplyQuote
Re: Looking for K2 683
Posted by: Norman Miller (---)
Date: November 18, 2019 06:55PM

Jim’s sugestions are top notch. Two of my favorite blanks.
Norm

Options: ReplyQuote
Re: Looking for K2 683
Posted by: Norman Miller (---)
Date: November 18, 2019 09:14PM

Get Bit has a 25% off on Phenix Blanks, it ends on Thursday 11/21. Call them to get details.
Norm

Options: ReplyQuote
Re: Looking for K2 683
Posted by: Roberto Matsuoka (---)
Date: November 19, 2019 06:40AM

Jim and Norman, thanks for the sugestions!!!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster