SPONSORS
2024 ICRBE EXPO |
Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Shaun Belcher
(---)
Date: November 06, 2019 04:38PM
If anyone here works for mudhole or has contacts with the manufacturer, that would be great.
I have a freight forwarder who is sending this product on to me and they refuse to ship it without a MSDS. Ive told them its water based and safe, but thats not good enough in their eyes. Any help would be appreciated. Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
John DeMartini
(---)
Date: November 06, 2019 04:53PM
Try www.msds,com. Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Shaun Belcher
(---)
Date: November 06, 2019 04:59PM
just looked there and also searched google found nothing.
Still waiting to hear back from mudhole. I bought this product over permagloss for the very reason i thought it would be safe! Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Doug Schreiber
(---)
Date: November 06, 2019 05:42PM
MSDS's hasn't been used in about 3 years. Look for SDS, that is the standard now. See you on the water, Doug Captain Paddlefoot Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Shaun Belcher
(---)
Date: November 06, 2019 07:15PM
Doug Schreiber Wrote:
------------------------------------------------------- > MSDS's hasn't been used in about 3 years. Look for > SDS, that is the standard now. nothing comes up on the google search, but called mudhole and they say they will email me a copy. Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Bill Sidney
(---.gci.net)
Date: November 07, 2019 12:42PM
try this one lots out there under SDS
SDS / MSDS Database Search - Safety Data Sheets Library | MSDSonline ] try this [ William Sidney AK Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Shaun Belcher
(---)
Date: November 07, 2019 04:53PM
Nothng turns up. Been on the phone again to mudhole and they say they have alot of requests like this from their international customers.
They are going to sort me out with the paperwork, so hopefully everything will be OK :) Re: Need MSDS for Threadmaster One One-Part Rod Finish
Posted by:
Brook Oliva
(---.se.biz.rr.com)
Date: November 08, 2019 02:03PM
Hi Shaun,
Sorry for the delay getting the info to you, its should be on its way via email now. Thanks. Kind Regards, Brook Oliva Mud Hole Custom Tackle, Inc. brook@mudhole.com (866)-790-RODS Sorry, only registered users may post in this forum.
|