I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Builders Warehouse
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Fixing up a old fenwick
Posted by: Taylor Nelson (---.rstr.qwest.net)
Date: November 03, 2019 01:44AM

In the process of stripping a fenwick rod someone made. They had it as a fly rod but I'm sure this blank was originally a spinning rod. But I took off the eyes and all the old wraps yet I have some residue of some sorts where the old wraps were and I tired getting some off and I got a little but now I lost the shine of the original rod and was wondering if there is something I could coat the rod with to restore the luster of it? Thanks in advance!

Options: ReplyQuote
Re: Fixing up a old fenwick
Posted by: Mark Hahn (---.123.131.174.dynamic.ip.windstream.net)
Date: November 04, 2019 09:11AM

Permagloss. Use the makeup sponges to apply it and let it stand to dry. It is pretty good stuff but it needs to be done in an area with good ventilation.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster