SPONSORS
2024 ICRBE EXPO |
Multi Rod Dryers
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: October 06, 2019 06:42AM
Considering adding some new multi rod dryers to the shop, and looking for any input. I currently use the Pac Bay 4 rod dryers mounted to the wall. Anyone have any experience with either the Flex Coat or CRB 4 rod dryers?
I don't really have time to build a set up, so looking for something to purchase. What I have works OK, but at times the small rollers get stuck and don't turn, and the rubber o-rings leave a nice rub mark in the blank finish - not very good. Thanks! Edited 1 time(s). Last edit at 10/06/2019 06:56AM by Marc Morrone. Re: Multi Rod Dryers
Posted by:
John DeMartini
(---)
Date: October 06, 2019 10:32AM
I have a home made system so I cannot comment on the commercial models.
I am cautious of rollers so when I use them I wrap electrical tape around the blank at each of the roller points,if the roller sticks the tape rubs on the roller and protects the blank. It takes a little extra time but worth it. Re: Multi Rod Dryers
Posted by:
roger wilson
(---)
Date: October 06, 2019 11:55AM
Marc,
If you like you could use one of these drum dryers to dry your rods. [www.rodbuilding.org] Drop me an e-mail if you would like more details. Take care Roger Edited 2 time(s). Last edit at 10/06/2019 04:07PM by roger wilson. Re: Multi Rod Dryers
Posted by:
Al Engling
(72.13.18.---)
Date: October 08, 2019 11:36AM
Best dryer out there. easy to use and holds multiple rods at one time. Contact Roger Wilson you be disappointed. Re: Multi Rod Dryers
Posted by:
Tom Kirkman
(Moderator)
Date: October 09, 2019 07:33PM
Al Engling Wrote:
------------------------------------------------------- > Best dryer out there. easy to use and holds > multiple rods at one time. Contact Roger Wilson > you be disappointed. Roger doesn't sell rod building wrappers and dryers. He's not a sponsor here and understands that using this forum to steer people to such products of his making would be a blatant violation of the forum rules. .......... Re: Multi Rod Dryers
Posted by:
Al Engling
(72.13.18.---)
Date: October 10, 2019 09:08AM
Thanks for the info and understand! Re: Multi Rod Dryers
Posted by:
Tom Kirkman
(Moderator)
Date: October 10, 2019 12:59PM
No problem. I'm sure if Roger had been getting sales based on promoting such products on this forum and photo page, he would have bought a sponsorship in order to give back and help support the cost of the sales medium that he had benefitted from.
.......... Sorry, only registered users may post in this forum.
|