I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Multi Rod Dryers
Posted by: Marc Morrone (---.dsl.airstreamcomm.net)
Date: October 06, 2019 06:42AM

Considering adding some new multi rod dryers to the shop, and looking for any input. I currently use the Pac Bay 4 rod dryers mounted to the wall. Anyone have any experience with either the Flex Coat or CRB 4 rod dryers?

I don't really have time to build a set up, so looking for something to purchase.

What I have works OK, but at times the small rollers get stuck and don't turn, and the rubber o-rings leave a nice rub mark in the blank finish - not very good.

Thanks!



Edited 1 time(s). Last edit at 10/06/2019 06:56AM by Marc Morrone.

Options: ReplyQuote
Re: Multi Rod Dryers
Posted by: John DeMartini (---)
Date: October 06, 2019 10:32AM

I have a home made system so I cannot comment on the commercial models.

I am cautious of rollers so when I use them I wrap electrical tape around the blank at each of the roller points,if the roller sticks the tape rubs on the roller and protects the blank.

It takes a little extra time but worth it.

Options: ReplyQuote
Re: Multi Rod Dryers
Posted by: roger wilson (---)
Date: October 06, 2019 11:55AM

Marc,
If you like you could use one of these drum dryers to dry your rods.


[www.rodbuilding.org]


Drop me an e-mail if you would like more details.

Take care
Roger



Edited 2 time(s). Last edit at 10/06/2019 04:07PM by roger wilson.

Options: ReplyQuote
Re: Multi Rod Dryers
Posted by: Al Engling (72.13.18.---)
Date: October 08, 2019 11:36AM

Best dryer out there. easy to use and holds multiple rods at one time. Contact Roger Wilson you be disappointed.

Options: ReplyQuote
Re: Multi Rod Dryers
Posted by: Tom Kirkman (Moderator)
Date: October 09, 2019 07:33PM

Al Engling Wrote:
-------------------------------------------------------
> Best dryer out there. easy to use and holds
> multiple rods at one time. Contact Roger Wilson
> you be disappointed.

Roger doesn't sell rod building wrappers and dryers. He's not a sponsor here and understands that using this forum to steer people to such products of his making would be a blatant violation of the forum rules.

..........

Options: ReplyQuote
Re: Multi Rod Dryers
Posted by: Al Engling (72.13.18.---)
Date: October 10, 2019 09:08AM

Thanks for the info and understand!

Options: ReplyQuote
Re: Multi Rod Dryers
Posted by: Tom Kirkman (Moderator)
Date: October 10, 2019 12:59PM

No problem. I'm sure if Roger had been getting sales based on promoting such products on this forum and photo page, he would have bought a sponsorship in order to give back and help support the cost of the sales medium that he had benefitted from.

..........

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster