SPONSORS
2024 ICRBE EXPO |
Rod stand to use for rod builds in progress
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: October 01, 2019 04:37PM
Over the years, I have made several different rod stands to use to hold a bunch of fishing rods, that are either being built, or to use as storage when traveling or other rod storage:
[www.rodbuilding.org] Basically a piece of wood with a tight fitting hole for pieces of PVC pipe to fit. The pvc pipe size is selected, based on the size of the grips of the rods to be stored. i.e. small pipes for rods with small diameter handles, and larger pipe sizes for rods with larger diameter grips. Re: Rod stand to use for rod builds in progress
Posted by:
ben belote
(---.zoominternet.net)
Date: October 01, 2019 04:46PM
Roger, looks good to me..simply gets the job done..and doesn,t take up much space... Re: Rod stand to use for rod builds in progress
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: October 01, 2019 08:13PM
Ben,
If using them during a fishing trip, the pipes come out and the holder and its parts pack in a very small space. When ice fishing where I want a half dozen rods handy, I use the same concept - except that the board is a 2x4 with the center hole being for a dowel that has a hole in the top end for a rope to easily carry the rods. By using the 2x4, the form factor is narrow which makes for easy storage in a cramped ice hut. Re: Rod stand to use for rod builds in progress
Posted by:
ben belote
(---.zoominternet.net)
Date: October 01, 2019 09:02PM
good ideas Roger..Thanks for showing it..also, from what i read your going to have a very long ice fishing season this winter..stay warm.. Re: Rod stand to use for rod builds in progress
Posted by:
ben belote
(---.zoominternet.net)
Date: October 01, 2019 09:03PM
good ideas Roger..Thanks for showing it..also, from what i read your going to have a very long ice fishing season this winter..stay warm.. Re: Rod stand to use for rod builds in progress
Posted by:
David Sytsma
(---.dhcp.bycy.mi.charter.com)
Date: October 01, 2019 09:26PM
Bring on the ice! I'm ready already. Re: Rod stand to use for rod builds in progress
Posted by:
ben belote
(---.zoominternet.net)
Date: October 01, 2019 09:53PM
David,i know how you feel..i miss those days..lol. Re: Rod stand to use for rod builds in progress
Posted by:
Mark Talmo
(71.147.59.---)
Date: October 02, 2019 03:39PM
KISS = Keep It Simple Stupid. You have accomplished that even though you are far from being stupid. It is simple, effective, easy to make, very little cost and it looks very nice as well. I have learned to not expect anything less from you, Roger. GOOD JOB!!! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Rod stand to use for rod builds in progress
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: October 03, 2019 07:32PM
Ice! Yesterday it was 90F here, today it never hit 60. I'm FMAO! Re: Rod stand to use for rod builds in progress
Posted by:
roger wilson
(---)
Date: October 04, 2019 10:17AM
Snow in North Dakota today. Re: Rod stand to use for rod builds in progress
Posted by:
roger wilson
(---)
Date: October 04, 2019 10:18AM
Snow in North Dakota today.
+103 in Alabama today. Re: Rod stand to use for rod builds in progress
Posted by:
ben belote
(---.zoominternet.net)
Date: October 05, 2019 04:28PM
the governor of montana declaired a state of emergency..they got over 4.5 feet of snow.. Sorry, only registered users may post in this forum.
|