I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

2020 rodbuilding expo
Posted by: John Duncan (---.hsd1.fl.comcast.net)
Date: August 16, 2019 07:55AM

Making arrangements early
Noticed the following
Show dates 2–15, 2-16
Marriott special rate dates 2-20-,2-24

I’m sure just an a minor mistake
I just dont want to miss that good rate

Not sure who to send this too , just post here

Thanks
John d

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: Tom Kirkman (Moderator)
Date: August 16, 2019 10:48AM

Expo dates are correct. I'll send a note to the Marriott to change their room dates to coincide.

............

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: John Duncan (---.hsd1.fl.comcast.net)
Date: August 16, 2019 11:23AM

Terrific
Thanks

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: Tom Kirkman (Moderator)
Date: August 16, 2019 02:27PM

I have just been informed that we have been moved to the 22nd and 23rd. So much for the dates listed in the new magazine.


.............

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: August 16, 2019 05:24PM

That @#$%&, I was hoping to go to Mardi Gras

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: John Duncan (---.hsd1.fl.comcast.net)
Date: August 16, 2019 08:01PM

Expo dates have changed correct??
To Feb 23-24?
Let the good times roll

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: Tom Kirkman (Moderator)
Date: August 16, 2019 08:24PM

Yes.

...........

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: Todd R. Vivian (---.se.biz.rr.com)
Date: August 19, 2019 10:15AM

Oh dang, I was hoping to come this year and the 15th and 16th worked out well..... Oh Well, maybe another year....

Regards,
Todd Vivian
Mud Hole Custom Tackle

todd@mudhole.com

Options: ReplyQuote
Re: 2020 rodbuilding expo
Posted by: Philip Engle (---.hsd1.ga.comcast.net)
Date: August 20, 2019 05:57PM

Doggone it! I was planning to make an extra effort to finally come in 2020, but that revised weekend of Feb 23-24 will have me overseas! The original, earlier, weekend would have been just right! Oh well

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster