SPONSORS
2024 ICRBE EXPO |
color match for immortal
Posted by:
Tim I. Johnson
(---.dsl.dyt2oh.sbcglobal.net)
Date: July 16, 2019 08:33AM
Hello All,
I have a few immortal blanks to build on and was wondering what color thread would match the TC color of the blank. Either using CP or not, actually suggestions for both ways would be appreciated. Thanks in advance, TJ Re: color match for immortal
Posted by:
Gary Kilmartin
(135.26.202.---)
Date: July 16, 2019 06:43PM
Prowrap 813 Silver Shiner is what I’ve been told to try. i have a spool, but have not yet had a chance to try it. On the spool, it looks very close. Alps has some TC finished guides which match the blanks nicely. Re: color match for immortal
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: July 16, 2019 06:58PM
[www.proproducts.us]
-------------------------- I have built quite a few rods on the immortal blanks and I have found that both my clients as well as myself would rather have the guides wrapped in black with an appropriate contrasting metallic trim color. But, a rod can be wrapped with any color as you know. Choose what suits you. Take care Re: color match for immortal
Posted by:
Tim I. Johnson
(---.dsl.dyt2oh.sbcglobal.net)
Date: July 17, 2019 08:27AM
Gary,
Thanks for the reply, that is actually a color I was considering , as well as prowrap equivalent to Gudebrod 720 (recommend by Kerry Batson) will try both of them. Roger , yep black is always a good look and almost always what I use for the guide wraps, thanks for the input. TJ Re: color match for immortal
Posted by:
Alex Weissman
(---.lightspeed.tukrga.sbcglobal.net)
Date: July 22, 2019 08:59AM
I've done a couple in black they're great looking. Sorry, only registered users may post in this forum.
|