SPONSORS
2024 ICRBE EXPO |
Carbon fiber removal update
Posted by:
Thomas Kaufmann
(---.mobile.att.net)
Date: July 07, 2019 09:58PM
Just wanted to provide a quick update. I Used a reverse pilot bit and it was wonderfully successful to remove the blank from the grip. Wear gloves and mask though... the blank splinters badly and does get slightly ground up during the process.
I used a chop saw to cut down blank to a workable length . This was a split grip rod so I cut the handle into two parts before using bit. Whole process took about 3 minutes. Tom Sorry, only registered users may post in this forum.
|