I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto Topic: Previous•Next
Goto: Forum List•Message List•New Topic•Search•Log In Or Register•Print View
Grey EVA grips
Posted by: Shane Jarvis (161.7.159.---)
Date: May 21, 2019 02:05PM

Does anyone have a source for grey EVA grips? I searched the topic and didn't get the results I was looking for. I don't not have the capability to turn my own right now.

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Robert A. Guist (---.triad.rr.com)
Date: May 21, 2019 02:20PM

Hello Shane.

Check with MudHole on the left list of sponsors.


Tight Wraps & Tighter Lines.

Bob,

New Bern, NC.

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: May 21, 2019 05:18PM

what size are you looking for? ID?

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Brook Oliva (---.se.biz.rr.com)
Date: May 21, 2019 05:56PM

18" Unshaped Grips in 3 ID's, Available in Grey, Grey Grain, and Grey Urban Camo: [www.mudhole.com]

Also available in EVA Block: [www.mudhole.com]

Kind Regards,

Brook Oliva
Mud Hole Custom Tackle, Inc.
brook@mudhole.com
(866)-790-RODS

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Shane Jarvis (161.7.159.---)
Date: May 22, 2019 10:03AM

I guess I should have been a little more specific. I would like a pre-made split grip with a 3/8 inch inside diameter.

I don't have a lathe to turn my, how hard would it be shape the round EVA with out a lathe?

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Tom Kirkman (Moderator)
Date: May 22, 2019 11:43AM

You can make an impromptu lathe from a drill and a V-stand. Check the photo page under tools and see what turns up. This sort of set-up is usually good enough for occasionally shaping of small EVA pieces.

.............

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Shane Jarvis (161.7.159.---)
Date: May 22, 2019 12:02PM

Tom Kirkman Wrote:
-------------------------------------------------------
> You can make an impromptu lathe from a drill and a
> V-stand. Check the photo page under tools and see
> what turns up. This sort of set-up is usually good
> enough for occasionally shaping of small EVA
> pieces.
>
> .............


Thanks, I think I will give that a try

Options: Reply•Quote
Re: Grey EVA grips
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: May 23, 2019 07:00PM

You do have the capability to make your own. Break out your 3/8 drill, install your 3/8 drill bit, slip on the grip, fire up the drill and shape the EVA to your liking with sandpaper, maybe 5 minutes per piece.

Options: Reply•Quote


Goto: Forum List•Message List•Search•Log In Or Register
Sorry, only registered users may post in this forum.
Click here to login
Webmaster