SPONSORS
2024 ICRBE EXPO |
Ice rods
Posted by:
Pat Retlich
(---.clevwi.dsl.dynamic.tds.net)
Date: May 13, 2019 10:45AM
I'm trying to find posts or discussions on ice rods and blanks but my searches come up empty. Can anyone point me in the right direction? Re: Ice rods
Posted by:
Ryan Anderson
(---.co.ottertail.mn.us)
Date: May 13, 2019 12:26PM
Check out the following link for some discussion:
[www.rodbuilding.org] I use Sportsmens Direct, VLine Custom Rods and @#$%& for most of my ice blank orders. Anything specific you are looking for or wanting to inquire about? Re: Ice rods
Posted by:
Jay McKnight
(---.dhcp.aldl.mi.charter.com)
Date: May 14, 2019 08:25PM
look on Ice Shanty.com and In-Depth-Outdoors' forums. Tons and Tons of discussions about custom ice rods and custom ice rod blanks. For my own personal needs, I agree with Ryan, @#$%& and Sportsman's Direct both have a pretty good line-up for very little money. Re: Ice rods
Posted by:
Pat Retlich
(---.clevwi.dsl.dynamic.tds.net)
Date: May 16, 2019 11:43AM
Thanks Ryan and Jay for the good info.
I am currently working on two rods now using @#$%& blanks. I made 2 rods with Janns Netcraft micro lite blanks that turned out ok but were a little to light (action) for me. Re: Ice rods
Posted by:
Jay McKnight
(---.dhcp.aldl.mi.charter.com)
Date: May 16, 2019 05:14PM
Pat Retlich Wrote:
------------------------------------------------------- > Thanks Ryan and Jay for the good info. > I am currently working on two rods now using > @#$%& blanks. I made 2 rods with Janns > Netcraft micro lite blanks that turned out ok but > were a little to light (action) for me. Which blanks? For $7, his power noodle is a bluegill harvesting machine. Re: Ice rods
Posted by:
Pat Retlich
(---.clevwi.dsl.dynamic.tds.net)
Date: May 21, 2019 04:56PM
Jay McKnight Wrote:
------------------------------------------------------- > Pat Retlich Wrote: > -------------------------------------------------- > ----- > > Thanks Ryan and Jay for the good info. > > I am currently working on two rods now using > > @#$%& blanks. I made 2 rods with Janns > > Netcraft micro lite blanks that turned out ok > but > > were a little to light (action) for me. > > Which blanks? For $7, his power noodle is a > bluegill harvesting machine. I used @#$%& solid carbon perch blanks which I sanded down a bit. Sorry, only registered users may post in this forum.
|