nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Weave size
Posted by: Jeffrey D Rennert (---.lightspeed.jcvlfl.sbcglobal.net)
Date: May 12, 2019 08:04PM

I did a 22 thread spelling Eagles. I saw the tapering but my thought was 22 threads is 22 threads! Well the letters are smaller proportionally along the taper. This is hurting my head. Please explain this. Thanking all in advance

Options: ReplyQuote
Re: Weave size
Posted by: Tom Kirkman (Moderator)
Date: May 12, 2019 09:10PM

If the width is different, then even at the same height they will appear different in size. Sort of like a 4 thread trim band near the rod tip section and the same 4 thread trim band closer to the butt. The one near the tip will appear a lot longer. It's the ratio of height to width that's throwing you off.


Options: ReplyQuote

Sorry, only registered users may post in this forum.