SPONSORS
2024 ICRBE EXPO |
Re: Roller stands.. Ive had enough of V stands..
Posted by:
Anthony Unger
(---.sub-174-201-12.myvzw.com)
Date: May 11, 2019 01:25AM
I have to say without a doubt, this is a true passion, not just a hobby.. I only wish i would have started building ealier.. If and when i can, this is going to be my future source on income, rod building calms me down, and wakes what has been inside me for years... I plan on upgrading to proper, fully adapable equipment in time.. This is just to get by until then.. Ive already put my heart and soul into it.. Why not everything else? Needless to say. Im an addict.. Lol thank you all for the support.. Re: Roller stands.. Ive had enough of V stands..
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 11, 2019 05:30AM
Anthony,
I am dropping the rollers in the mail in the morning. You will have them next week. Roger Re: Roller stands.. Ive had enough of V stands..
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 11, 2019 09:00AM
Awesome, thanks roger.. And every one else Re: Roller stands.. Ive had enough of V stands..
Posted by:
Anthony Unger
(---.sub-174-201-7.myvzw.com)
Date: May 11, 2019 09:45PM
Well, that didnt work.. Lol the hardware i grabbed wont work since the derlin the guy at work cut for me cut them at 3/8th thick.. And the shanks wernt long, enough.. Guess im not getting those done thos weekend after all.. Re: Roller stands.. Ive had enough of V stands..
Posted by:
Doug Cox
(---.triad.res.rr.com)
Date: May 12, 2019 07:30AM Re: Roller stands.. Ive had enough of V stands..
Posted by:
Mark Talmo
(71.147.59.---)
Date: May 12, 2019 06:56PM
Doug,
Very nice rollers indeed!!! The slotted uprights are very nice as well. How do you keep the roller support bar from pivoting down with the weight of a rod? What did you use for bearings or bushings? Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Roller stands.. Ive had enough of V stands..
Posted by:
Doug Cox
(---.dsl.rtmc.net)
Date: May 12, 2019 08:30PM
Thanks - The horizontal bars have a slot machined in them that matches the width of the upright bar. Once put together, a right angle with always be maintained. I used ball bearings in the wheels - # R3ZZ. Re: Roller stands.. Ive had enough of V stands..
Posted by:
Mark Talmo
(71.147.59.---)
Date: May 12, 2019 08:46PM
Thanks, Doug. Again, nice job. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Roller stands.. Ive had enough of V stands..
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 13, 2019 11:50AM
The larger rollers are nice and work well.
But, actually 3/4 inch ball bearing v groove shower door rollers work very well and the smaller size lets one work close to the blank without having the rollers be in the way of the rod building. Ball bearing patio door rollers make a very nice life time power wrapper rod rest roller. Good luck Re: Roller stands.. Ive had enough of V stands..
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 13, 2019 03:23PM
How is this even possible? Out of the 3 power wrappers i got through mud hole, all 3 had shot bearings from the get go.. I always figured it was just a noisy head.. All i hear now is the wine on the motor.. Since i just replaced the 2 bearings in the head.. And another thing about the RBS pro power wrapper.. CRBs website wont get back to me about it, they ignore the emails, they dont even have it on their site... Who owns the rbs pro power wrapper? I mean come on... Re: Roller stands.. Ive had enough of V stands..
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 13, 2019 07:23PM
Anthony,
Be calm and breath some incense and chill. You are talking about the competitiveness of the free market system. Folks who want to sell products, want to sell a product that costs the least amount possible for the highest possible price to maximize profit. You want to buy a product for the least amount possible to keep your money in the bank and not in the pocket of a product manufacturer. When you receive the product you also expect Cadillac or perfect performance and in the case of this product with 0 sound. Unfortunately, it is impossible to satisfy the marketing requirements of the manufacturer and your user requirements at the price point that you are willing to pay. In addition, in the case of the power wrapper, there are close to 0 products on the market that fully satisfy the real wishes of many rod builders at ANY price because the product is not available. Best wishes. Re: Roller stands.. Ive had enough of V stands..
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 14, 2019 02:11AM
Its just a little stressful roger.. Second shift makes doing anything difficult.. Expecially finding the time to fix and correct problems that should never happen in the first place..
I just posted on the other thread about the power wrapper .. Im done.. Im calming.. Its just very frustrating sometimes... Your right.. And i dont mind paying for quality.. I spent a good month debating on which wrapper to get... I decided on the pro wrapper due to its integration to the RBS, im surpirsed they havent released rollerstands for the system yet.. And if i had to purchase everything over again, i would cholse a diffrent route.. Less headaches.. Sorry, only registered users may post in this forum.
|