I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Help with rod I.D.
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: May 08, 2019 07:16PM

I'm hoping someone can tell me where I might see photos of the last Wonderods / first Ugly Stiks. I have a spinning rod that has the Wonderod decal ( decal is blue and green with white lettering) There is a decal missing just in front of the foregrip. Blank is black, wraps are black with narrow white trim bands. There is a single white single thread crosswrap about 3 inches long in front of the foregrip. Everything about this rod screams Ugly Stik, right down to the clear tip with visible carbon ribbon inside. Cork grips, black aluminum reel seat. Anybody?

Options: ReplyQuote
Re: Help with rod I.D.
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: May 08, 2019 08:03PM


Options: ReplyQuote
Re: Help with rod I.D.
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: May 08, 2019 09:15PM

No cigar Roger, thanks though.

Options: ReplyQuote
Re: Help with rod I.D.
Posted by: Anthony Unger (---.sub-174-201-17.myvzw.com)
Date: May 08, 2019 11:31PM

Try and send me a pic lynn, or ill take a photo next time im up.. It reminds me alot of that old abu garcia i picked up..

Ive seen the rod, its fricken sweet...

Options: ReplyQuote
Re: Help with rod I.D.
Posted by: Anthony Unger (---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 09, 2019 03:19AM

Acually lynn, look at the reel seat, there may be a model # discreetly placed.. We shall go from there

Options: ReplyQuote
Re: Help with rod I.D.
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: May 09, 2019 03:05PM

Actually Anthony, my son said give it to you so you can work your restoration magic on it and give it to some kid or keep it, your choice. My departed brother would be happy to know it found a good home. It's your rod, so you can take over the research till your heart's content. I'm getting nowhere. So there! It's a 2 pc. and as you know, the only good rods are 1 pc. lol!

Options: ReplyQuote
Re: Help with rod I.D.
Posted by: Anthony Unger (---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 10, 2019 02:34AM

Fair enough.. Lol i'll gladly take it and make her b-e-a- utiful, next time we get together, thanks lynn.. Your a stand up guy..

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster