SPONSORS
2024 ICRBE EXPO |
Help with sealing thread over rubber
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 05, 2019 03:36AM
So i got ahold of some electrical shrink tubing.. Big stuff, like for 750kmcm or 500mcm.. Diffrent colors.. Figured what the @#$%&, lets see what all the fuss is about with using tubing over old cork.. So i wrapped a thread to create a textured feel, used the shrink, it needed something else.. To.. Bland.. So j decided to put some thread work over top, just to see what it would look like..
Well, i really kinda like it.. Lol Normally in a situation like this, and not using rubber, i would just use permagloss... But i cant in this situation since permagloss will eat the rubber... Any suggestions on a good, flexible, durable, and non agressive finish for this application? Maybe varnish? I want to add a bit more thread to it, but i dont want to waste the thread, or time, if theres really nothing out there Re: Help with sealing thread over rubber
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: May 05, 2019 03:48AM
Are you sure it will eat it? It doesn't eat winding checks. Re: Help with sealing thread over rubber
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 05, 2019 03:53AM
Im not.. Gimmie 5 min. Lol.. I have a scrap piece left over.. I will say this though.. It will curl vynl.. My biohazard rod had all the edges curling on the vynl cutout i used. I managed to keep poking it down until the gloss set up enough to hold it..
Arent most winding checks nylon? Re: Help with sealing thread over rubber
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 05, 2019 04:02AM
Well.. I stand corrected... Permagloss does not attack electrical shrink tubing.. Guess this is why we should test before asking.. Lol well that makes things a heck of alot easier then i thought... Lol
Thanks.. I know you didnt do much, but it helped :) Re: Help with sealing thread over rubber
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: May 05, 2019 08:57PM
Saw this rod today, it's gonna be spectacular! Fit for publication. Re: Help with sealing thread over rubber
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: May 05, 2019 09:20PM
Lol maybe when its done.. But i wouldnt go that far! Re: Help with sealing thread over rubber
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: May 06, 2019 08:14PM
I'll be old before it gets done! Re: Help with sealing thread over rubber
Posted by:
Anthony Unger
(---.sub-174-201-19.myvzw.com)
Date: May 06, 2019 08:47PM
Na.. Im doing that fiberglass restore, then a restore for my mother, THEN its back to it... So next week lol Re: Help with sealing thread over rubber
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: May 09, 2019 05:06PM
Boy, your'e polite! I would have said, and expected you to say: "your'e already old!" Re: Help with sealing thread over rubber
Posted by:
Anthony Unger
(---.sub-174-201-16.myvzw.com)
Date: May 09, 2019 06:17PM
All my friends are much older then me.. Ive always been told i have an old sole.. As far as im concerned, we are the same age.. Kinda.. Lol you and i seem to think fairly the same, im just nkt a cyborg lol Sorry, only registered users may post in this forum.
|