SPONSORS
2024 ICRBE EXPO |
1 piece into a 2 or 3 piece?
Posted by:
Chris Zarza
(---.mobile.att.net)
Date: March 27, 2019 10:45PM
Is this doable without problems? I’d like to buy a rod maybe 6 inches longer than I’d like to cut it down for transport ability.
I’d like to do this for a travel rod that fits in a backpack or a long surf rod like 9+ feet. Edited 1 time(s). Last edit at 03/27/2019 10:46PM by Chris Zarza. Re: 1 piece into a 2 or 3 piece?
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: March 28, 2019 12:22AM
Why bother when there are so many great travel rod and 2 piece blanks for little extra money? Re: 1 piece into a 2 or 3 piece?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 28, 2019 12:24PM
10-4 on Spencer's comments.
Chris, If you want to do what you want to do, then buy 3 full size blanks and cut each one to the length that you want, so that you will have pieces that will fit inside of one another. That is about the only way to do what you want and still have the length where you want it. But, buying a 2 or 3 piece blank is a much better option. Re: 1 piece into a 2 or 3 piece?
Posted by:
Mark Talmo
(71.147.59.---)
Date: March 28, 2019 06:12PM
Chris,
Search “CARL Ferrules” in the Forum and Photo sections. If you are uncomfortable doing it yourself, contact me. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: 1 piece into a 2 or 3 piece?
Posted by:
Mark Talmo
(71.147.59.---)
Date: March 30, 2019 11:40PM
Chris,
You have received replies to answer your question from both veterans and novices. After taking their time to attempt to assist, you could at least acknowledge, if not thank, those trying to fulfill your quest of knowledge. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Sorry, only registered users may post in this forum.
|