SPONSORS
2024 ICRBE EXPO |
NFC x-ray 733-1
Posted by:
Rob Laskowski
(---.hsd1.il.comcast.net)
Date: March 27, 2019 08:42AM
New and would like info on NFC x-ray 733 -1 rod for throwing 1/16 - 1/8 jigs
And also bottom contact jigs 3/16 - 1/4 And how the weight compared to the x-ray 732 Re: NFC x-ray 733-1
Posted by:
josh keller
(---.hsd1.wv.comcast.net)
Date: March 27, 2019 09:39PM
i have both rods - for the lighter jigs, i much prefer the x ray DS 721 blank and use it extensively for small jigs up to 3/16 oz. i use my sj702 for 1/4 oz jigs, and the x ray mb733 for everything else up to 3/8 oz. The 733 casts 1/4 oz jigs just fine, but ive found the sj702 casts a bit better with wind resistant baits due to it flexing a tiny bit more. Edited 1 time(s). Last edit at 03/27/2019 09:42PM by josh keller. Re: NFC x-ray 733-1
Posted by:
Dean Veltman
(---.hsd1.mi.comcast.net)
Date: March 27, 2019 10:04PM
josh keller Wrote:
------------------------------------------------------- > i have both rods - for the lighter jigs, i much > prefer the x ray DS 721 blank and use it > extensively for small jigs up to 3/16 oz. i use my > sj702 for 1/4 oz jigs, and the x ray mb733 for > everything else up to 3/8 oz. The 733 casts 1/4 oz > jigs just fine, but ive found the sj702 casts a > bit better with wind resistant baits due to it > flexing a tiny bit more. Did you make the sj 702 and mb 733 as casting or spinning rods? Re: NFC x-ray 733-1
Posted by:
Rob Laskowski
(---.hsd1.in.comcast.net)
Date: March 28, 2019 02:10PM
Thanks for the input josh , I appreciate your help I looked the FW 702 (IM) do you thinking would have enough tip to set the hook on Texas rig plastics ? Sorry, only registered users may post in this forum.
|