I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Wiebe Reel Seats?
Posted by: Denham Bruce (---.nat.uw.edu)
Date: February 19, 2019 03:46PM

Anyone know where I could get parts for one of these reel seats for a casting build? I was looking to make a build with this reel seat like on the old Loomis IMX Steelhead rods but to my knowledge they're discontinued and not available anywhere online. Figured somebody on here might know a guy...

Options: ReplyQuote
Re: Wiebe Reel Seats?
Posted by: Spencer Phipps (172.58.45.---)
Date: February 19, 2019 04:26PM

Buy an Edge rod and get a reelseat installed on the rod. Only Gary has the pattern now, and it says Edge on it. The last Super Stickers were on the G Loomis pattern, might still be some of those around one builder had them for his builds a while back, but wanted big bucks for seat alone.

Options: ReplyQuote
Re: Wiebe Reel Seats?
Posted by: herb canter (---.atmc.net)
Date: February 19, 2019 05:03PM

Look at the last post in the thread below , names are mentioned and the member who posted the last post hasn't been active since 2017 , worth sending him an email and ask if he still has parts .


[www.rodbuilding.org]

Options: ReplyQuote
Re: Wiebe Reel Seats?
Posted by: Denham Bruce (---.nat.uw.edu)
Date: February 19, 2019 05:08PM

I actually have a few Edge rods and like those seats but I was referring to the ones with the wood or cork inserts. I will look to email that guy and see if he can help me out, thank you!

Options: ReplyQuote
Re: Wiebe Reel Seats?
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: February 19, 2019 09:51PM

Angler's Workshop at one time had all the parts, (cork inserts and spinning, or casting back pieces) selling fhem seperately except the threaded barrel. Don't think I've seen a wood insert since Wiebe closed their doors though Super Sticker made some for a while. If you can't find the cork inserts they are easy to make.



Edited 2 time(s). Last edit at 02/19/2019 10:07PM by Spencer Phipps.

Options: ReplyQuote
Re: Wiebe Reel Seats?
Posted by: Ron Schneider (---.mid.dyn.suddenlink.net)
Date: February 20, 2019 12:51PM

We may have that. Email me direct with your needs.

Best wishes,
Ron Schneider
Schneider's Rod Shop
Mountain Home, Arkansas
[www.schneidersrods.com]
schndrod@suddenlink.net
870-424-3381

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster