SPONSORS
2024 ICRBE EXPO |
PacBay rodsmith finish
Posted by:
Tamas Toth
(---.83.15.190.pool.invitel.hu)
Date: February 12, 2019 03:10AM
Hi Mates,
Sorry for the stupid question, but I can't find the discription, if the PacBay Rodsmith finish is rather low- or high-build? I'm going to buy finish for a fly rod, and in the store where I purchase the blank from sells 3 kinds of high build finishes, and this PacBay. So is it low- or high build? Thank You for the answers! Regards, Tamás Tóth Re: PacBay rodsmith finish
Posted by:
Grant Darby
(172.92.68.---)
Date: February 12, 2019 10:29AM
Yes, it's low or high build finish. Light coat or coats make it a lite build, heavier coats make it a high build. Sort of like most finishes. Re: PacBay rodsmith finish
Posted by:
Tom Kirkman
(Moderator)
Date: February 12, 2019 10:50AM
It's a thick viscosity like most of the typical hi-build types. They all vary a bit, but it's not the thinner type such as Flex Coat Lite, etc.
................. Re: PacBay rodsmith finish
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: February 13, 2019 01:26AM
With a normal application it would be considered a high build finish. Its my go to finish for repairs. Dennis J. Danku (Sayreville,NJ) Re: PacBay rodsmith finish
Posted by:
Tamas Toth
(---.131.241.238.pool.invitel.hu)
Date: February 13, 2019 02:43AM
Okay, thank You for your answers!
Tamás Tóth Sorry, only registered users may post in this forum.
|