SPONSORS
2024 ICRBE EXPO |
Archives
Posted by:
ron zimmerman
(---.tcso.qwest.net)
Date: February 02, 2019 11:14PM
Were are they ? If it's under the director button my browser wont open it . Re: Archives
Posted by:
Tom Kirkman
(Moderator)
Date: February 02, 2019 11:17PM
"SEARCH"
................. Re: Archives
Posted by:
ron zimmerman
(---.tcso.qwest.net)
Date: February 02, 2019 11:24PM
I'm trying to find the placement and number of guides for an 11' 4wt rod . Search didn't turn that up at least not on the first page . Re: Archives
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: February 03, 2019 02:31AM
If your looking for a generic guide placement, wouldn't it be easier to find on one of the company sites? Re: Archives
Posted by:
Tom Kirkman
(Moderator)
Date: February 03, 2019 08:21AM
No two 11' 4-weight rods are going to have the same guide placement. Best to use a static distribution test (online library page here). Of course you can fall back on generic charts - they'll work okay. Being this is a custom rod building site, such charts aren't likely to be found here. It is possible that somebody has posted some spacing for a rod of similar length, but what Spencer suggested is probably your best bet if that's the direction you want to go.
................... Re: Archives
Posted by:
ron zimmerman
(---.tcso.qwest.net)
Date: February 03, 2019 09:46AM
I usually use the one on Proofs site and then adjust statically but it doesn't seem to be working right now . I'll try again later . Thx. Sorry, only registered users may post in this forum.
|