SPONSORS
2024 ICRBE EXPO |
Trading
Posted by:
Mitchell Martin
(---.celeritybroadband.com)
Date: January 19, 2019 06:26PM
Is there a site available where builders can trade items? I.E. i recently decided to switch to C & D sized thread. I now have 50+ spools of barely used, unneeded prowrap. Re: Trading
Posted by:
Roger Templon
(---.jst.pa.atlanticbb.net)
Date: January 19, 2019 06:46PM
Mitchell
Look above for the "buy/sell" tab and select it. There is a "for trade" section there. Rog Re: Trading
Posted by:
Tom Kirkman
(Moderator)
Date: January 19, 2019 08:06PM
The buy-sell page is down while the webmaster looks for a new software package for it.
.............. Re: Trading
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: January 19, 2019 09:43PM
Mitch, Do you have any colors that would match any and all St.Croix rods ?
Please respond via email. Dennis J. Danku (Sayreville,NJ) Edited 1 time(s). Last edit at 01/19/2019 11:35PM by Dennis Danku. Re: Trading
Posted by:
Mitchell Martin
(---.celeritybroadband.com)
Date: January 19, 2019 11:39PM
I would imagine i do. Like i mentioned, most are pro wrap, a few fishhawk and fuji mixed in. If you know the item number your after. Re: Trading
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: January 20, 2019 12:15PM
Thank you. Dennis J. Danku (Sayreville,NJ) Re: Trading
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: January 20, 2019 12:23PM
In the pro wrap 449 Nylon is a match for the Legend Tournament and 822 Nylon will match the Avid rods . Do not use color preserver on these threads.
Tom Edited 1 time(s). Last edit at 01/20/2019 12:24PM by Tom Wewerka. Re: Trading
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: January 20, 2019 10:50PM
Thanks Tom, That's a start. I sent St Croix a wish list of threads they use and hopefully they will help me out with the ID. Dennis J. Danku (Sayreville,NJ) Re: Trading
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: January 20, 2019 10:50PM
Thanks Tom, That's a start. I sent St Croix a wish list of threads they use and hopefully they will help me out with the ID. Dennis J. Danku (Sayreville,NJ) Re: Trading
Posted by:
Jonathan Hotham
(199.247.45.---)
Date: January 21, 2019 12:36PM
Mitchell Martin Wrote:
------------------------------------------------------- > Is there a site available where builders can trade > items? I.E. i recently decided to switch to C & D > sized thread. I now have 50+ spools of barely > used, unneeded prowrap. Mitchell, if interested in offloading the thread instead of a trade, send me an email. mmijonathan@hotmail.com I am just getting into rod building and I only have a couple spools of thread. I may be interested in buying your entire lot. Send me an email if your interested. Thanks. Re: Trading
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: January 21, 2019 04:10PM
Dennis Danku Wrote:
------------------------------------------------------- > Thanks Tom, That's a start. I sent St Croix a wish > list of threads they use and hopefully they will > help me out with the ID. Dennis if you get a reply please post it for all to read. Thanks Re: Trading
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: January 21, 2019 08:37PM
Will do. Dennis J. Danku (Sayreville,NJ) Re: Trading
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: January 26, 2019 08:28PM
Tom, NO REPLY YET! Dennis J. Danku (Sayreville,NJ) Re: Trading
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: January 27, 2019 06:05PM
Dennis Danku Wrote:
------------------------------------------------------- > Tom, NO REPLY YET! When I go to ICRBE if Jason Brunner is there again from St Croix I will ask him in person. I don't see why it's a big secret. Tom Sorry, only registered users may post in this forum.
|