SPONSORS
2024 ICRBE EXPO |
Scratches on blank
Posted by:
Paul Luechtefeld
(---.mobile.att.net)
Date: January 05, 2019 09:09PM
Can you cover the whole rod with pro coat? If not is there something else that will work. Re: Scratches on blank
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: January 05, 2019 11:08PM
Don’t use finish epoxy to coat a rod. If you want to get rid of scratches give it a clear coat by wiping on a thin coat of Permagloss. Do a search here to get the details for applying it.
Norm Re: Scratches on blank
Posted by:
Paul Luechtefeld
(---.mobile.att.net)
Date: January 06, 2019 08:53AM
Thanks Norman, I was thinking epoxy would be too heavy. Sorry, only registered users may post in this forum.
|