SPONSORS
2024 ICRBE EXPO |
Cutting my teeth with this hobbie
Posted by:
Jeremy DeCoudres
(---.ks.ks.cox.net)
Date: January 02, 2019 09:48AM
Hello,
I am wanting to give this rod building a try. I wish I could find some local classes but I live here in Kansas and have had no luck. So to get to my question where do I began. I mostly fly fish but was wanting to maybe give my first rod a try with a spinning rod for a saltwater So, where do I even began?? Re: Cutting my teeth with this hobbie
Posted by:
herb canter
(77.111.246.---)
Date: January 02, 2019 10:23AM
Sources abound , i just read through a 12 part " How to build a graphite rod" from the Bingham Enterprises sponsor on the left .
[flyanglersonline.com] Re: Cutting my teeth with this hobbie
Posted by:
John Cates
(---.sub-174-207-25.myvzw.com)
Date: January 02, 2019 11:24AM
Jeremy
We offer many free online videos on our website and Youtube channel that are informative, to the point, and high definition. Here is a link to them on our website: [flexcoat.com] Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Cutting my teeth with this hobbie
Posted by:
Jeremy DeCoudres
(---.ks.ks.cox.net)
Date: January 02, 2019 01:21PM
Thank You, Will look at them for sure. Re: Cutting my teeth with this hobbie
Posted by:
Robert Ford
(---.hsd1.ca.comcast.net)
Date: January 02, 2019 08:30PM
Check out Mudhole videos as well on YT. That will get you an idea of what's happening. Sorry, only registered users may post in this forum.
|