SPONSORS
2024 ICRBE EXPO |
Rod Geeks glass rods
Posted by:
Thomas Kaufmann
(---.mobile.att.net)
Date: January 01, 2019 09:06PM
Does anyone know if the Rod Geeks glass blanks are the same as the early SC1 blanks? I am trying to match an early SC1 blank with the specs of 10-17 1/4-3/4. I will call rod Geeks tomorrow but thought I would check here first.
Thanks Tom Re: Rod Geeks glass rods
Posted by:
herb canter
(77.111.246.---)
Date: January 01, 2019 11:49PM
I don't think you will find any current models in the Rod Geeks lineup that will be close to how the older St. Croix SC 1 glass blanks were . The S glass used these days are not only lighter but more responsive as well but as you mentioned calling Rod Geeks would be the smart thing to do .
Good luck Re: Rod Geeks glass rods
Posted by:
Tom Wewerka
(---.sub-174-205-8.myvzw.com)
Date: January 03, 2019 03:22PM
The RGeeks S Glass is in no way like the previous rods. It combines fiberglass and graphite scrim to provide optimum performance at a lighter weight putting the lighter graphite in areas that it needs to be. . You can call Mark Crupi or Bob Penicka at the rod Geeks and talk direct Re: Rod Geeks glass rods
Posted by:
Thomas Kaufmann
(---.mobile.att.net)
Date: January 03, 2019 10:25PM
Thank you for the responses. I will probably just order a couple to try out.
Thanks again Tom Sorry, only registered users may post in this forum.
|