Lamiglas SI 126-2 M, guide spacing etc

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Posted by: Eric Kolcinski (---.mobile.att.net)

Date: December 24, 2018 07:54PM

Hello all. I’m new to this group. I just got a Lamiglas SI 126-2 M blank. It’s the 10’6” float rod. I built a 9’6” from the infinity series last winter and a sweet Rainshadow RX8 that I fished heavy in the early season. I’m looking for guide spacing suggestions and component suggestions. I’ll be bottom drifting for mixed species for the most part, but it will also be fished with a float often. How have you all built this rod? If you were to build it again what would you change?

Thank you, Eric

Edited 1 time(s). Last edit at 12/24/2018 08:01PM by Eric Kolcinski.

Options: Reply•Quote