SPONSORS
2024 ICRBE EXPO |
Can you "stamp" EVA?
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: December 08, 2018 12:34PM
As the title suggest...
Not so much stamp as make a releif i guess.. An example of what i mean is the uglystik G2 handles.. The eva has 'uglystik' depressed into it.. Here is an example of what i mean.. [goo.gl] not the best example i know.. Re: Can you "stamp" EVA?
Posted by:
Tom Kirkman
(Moderator)
Date: December 08, 2018 12:53PM
No only can you do it, but RodMaker Magazine did a complete article on how to do it. It was in Volume 17 #2 and was penned by Nuno Paulino.
The only catch is that the impressions are laser cut, which is also almost certainly the case with the rod grips you mentioned above. There are quite a few shops that can do this for you and they're not extremely expensive. .............. Re: Can you "stamp" EVA?
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: December 08, 2018 01:02PM
Thanks tom, how are you always so quick to answer? Lol its like you have a tracking beacon implanted in your brain! Sorry, only registered users may post in this forum.
|