I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Fuji Perfect Fit question
Posted by: David DeBruhl (---.dhcp.gnvl.sc.charter.com)
Date: December 01, 2018 07:34AM

I am building a rod for a customer who wanted the Fuji PF handle assembly. I ordered all of the specific trim rings noted on the Anglers resource site and even talked to the customer support when I ordered. There just seems to be something missing where the cap ring on the carbon fiber hidden sleeve goes. I ordered the 24-12 size which the 12 mm is the inside diameter. The blank at this point is 10.2 mm, so there is more space than I like. It also does not look finished, like something is missing. I have tried and spoken with customer service from two separate supply houses and both tell me that is all the components listed for this assembly. Any ideas guys.

Options: ReplyQuote
Re: Fuji Perfect Fit question
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: December 01, 2018 09:00PM

is this measurement taken before or after thread and finish?

Options: ReplyQuote
Re: Fuji Perfect Fit question
Posted by: David DeBruhl (---.dhcp.gnvl.sc.charter.com)
Date: December 01, 2018 10:06PM

Before. I received a PM that the piece that I need is CREVA but most suppliers only carry the CREVD which is dual color. I am going to call the Rod Room and see if they can help.

Options: ReplyQuote
Re: Fuji Perfect Fit question
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: December 03, 2018 10:27AM

David if you can send a phone pic I'll try to spec what you need. Send to info@anglersresource.net. If you have a hard carbon sleeve you do not need CREVA.

Jim

Options: ReplyQuote
Re: Fuji Perfect Fit question
Posted by: David DeBruhl (170.7.248.---)
Date: December 03, 2018 02:31PM

Jim. This is on a hard carbon sleeve.I will send a pic this evening when I get home from work.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster