SPONSORS
2024 ICRBE EXPO |
help find article
Posted by:
Bill Lewis
(181.179.17.---)
Date: November 12, 2018 03:58PM
I recently moved and during the move the bottom gave out on the box with about ten years of RodMaker. The magazines were scattered all over.
Anyway, I now need to find the volume and issue number for the issue that had the article on building a three piece travel rod out of two identical rod blanks. Seems like it came out within the last year or so. Any help is greatly appreciated. Thanks in advance . Re: help find article
Posted by:
Robert A. Guist
(---.triad.rr.com)
Date: November 12, 2018 10:00PM
Hello Bill.
Try Volume 17, Issue 4, Page 18. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: help find article
Posted by:
Bill Lewis
(181.179.17.---)
Date: November 13, 2018 09:11AM
Hi Bob,
Thanks a lot for the issue info. Now I have a second problem. My library goes back to Volume 5, I checked all the way back and Volumes 17, 18, 19 are missing??? I jump to volumes 20, 21 so now my search is on for a stack of magazines. Thanks again for the help. Bill Re: help find article
Posted by:
Robert A. Guist
(---.triad.rr.com)
Date: November 13, 2018 02:55PM
Hello Bill.
You can go to the RodMaker Magazine site and back order a lot of different volumes & issues or even a cd, Check it out. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: help find article
Posted by:
Bill Lewis
(181.179.17.---)
Date: November 15, 2018 08:36AM
Bob,
Thanks to you I have found all of my missing magazines volumes 17, 18, and 19...I now have a complete set from volume 5 to present. I do a lot of plane travel to fish and I think travel rods are the future, especially with the way airlines charge for and treat rod tubes. I have been wanting to make a task specific trolling rod for 50 lb line. Mud Hole had a usable blank on sale so I am going to give it a shot. mThanks again Bill Re: help find article
Posted by:
Robert A. Guist
(---.triad.rr.com)
Date: November 15, 2018 02:15PM
No Problem Bill.
Tight Wraps & Tighter Lines. Bob, New Bern, NC. Sorry, only registered users may post in this forum.
|