I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

mix two-element epoxy with phosphoresent stick
Posted by: ATHANASIOS TSOMAKIAN (---)
Date: October 19, 2018 06:12AM

i want to now if i can mix two-element epoxi with phosphorescent stick.

Options: ReplyQuote
Re: mix two-element epoxy with phosphoresent stick
Posted by: roger wilson (---)
Date: October 19, 2018 08:02AM

Try it on a test rod and then you will know for sure.

You can certainly mix a lot of pigments with epoxy to color the mix, so there is a fair chance that you could mix some glow in the dark powder with the epoxy.

Good luck

Options: ReplyQuote
Re: mix two-element epoxy with phosphoresent stick
Posted by: Matthew Pitrowski (---.lightspeed.milwwi.sbcglobal.net)
Date: October 19, 2018 06:40PM

Yes you can I have used glow powders and and the glow powder paint for jigs it all worked just don't add to much or you will end up with glow mud

The best day to be alive is always tomorrow !!
Think out side the box when all else fails !!!
Wi.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster