SPONSORS
2024 ICRBE EXPO |
Guides for rebuild
Posted by:
Mark Hahn
(---.165.213.151.dynamic.ip.windstream.net)
Date: October 15, 2018 07:28PM
I''m rebuilding an old St. Croix 11 foor surf rod for a friend. The rod has an old but effective metal ferrule. In all my tape up casting tests, it works best when the 40mm guide is mounted on the ferrule. Is there any reason I can't mount the base guide on the ferrule? Re: Guides for rebuild
Posted by:
Tom Kirkman
(Moderator)
Date: October 15, 2018 09:25PM
No, not really.
............ Re: Guides for rebuild
Posted by:
Bill Sidney
(---.gci.net)
Date: October 15, 2018 11:09PM
The bottom line, you got to move it , so move it up an down the rod then test cast it, see what works best for you , William Sidney AK Re: Guides for rebuild
Posted by:
Mark Talmo
(---)
Date: October 16, 2018 12:05AM
Although not experiencing the need yet, I have wondered about precisely what Mark H. is inquiring. With two initial different views from respected, veteran rod builders, allow me to stir-the-pot to learn what’s up for dinner. Anxious to learn from others as well on the subject. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Sorry, only registered users may post in this forum.
|