SPONSORS
2024 ICRBE EXPO |
Re: New Issue
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: September 25, 2018 04:52PM
Looking forward to seeing Bill's article. HE's been going to ICRBE's for a long time, although I haven't seen him since High point. He does really nice work, as seen on teh cover. Re: New Issue
Posted by:
Tom Kirkman
(Moderator)
Date: September 25, 2018 07:46PM
Instructions for making his unique EVA cutting tool are also included along with his technique article.
.................. Re: New Issue
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: September 25, 2018 09:55PM
He had another cutting tool that was featured in an article several years ago, right? Re: New Issue
Posted by:
Tom Kirkman
(Moderator)
Date: September 25, 2018 10:21PM
Yes. There is now some additional information to go with his article which details how to use a "fence" to get verbatim cuts each time. Pretty clever.
............... Re: New Issue
Posted by:
Bill Marchisella
(---.nycmny.fios.verizon.net)
Date: September 26, 2018 01:02PM
Tom, the cover looks great! Thanks. Billy, thanks for the compliments, coming from the eva guru! I believe I sent you one of the eva cutting tools. Hopefully, I'll make to the show this year. Re: New Issue
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: September 26, 2018 02:23PM
You're welcome Bill. Hopefully you'll make it to Winston Salem this year. Yes I did have one of your cutting tools, I have a bandsaw and lathe so it wasn't something I could use. FOr those who do not have access to those tools, your methods should open up an entire world to rodbuilders that never knew how easy it was to make awesome EVA inlays Re: New Issue
Posted by:
Bill Marchisella
(---.nycmny.fios.verizon.net)
Date: September 26, 2018 03:34PM
Billy, you are right.. I wrote this article to show how I make my grips .and how easy it really is. If you can glue a model plane or car together you should have no problem making my grips. I also want to thank Tom again for printing the article in the Rodmaker Magazine. Re: New Issue
Posted by:
Tom Kirkman
(Moderator)
Date: September 26, 2018 04:06PM
We sometimes forget that many if not most rod builders do not have power tools readily available and therefore have to rely on more simple methods. Bill has provided some means to get the same results you'd get with power tools, with common items that most rod builders have or can cobble together. Great article.
.............. Re: New Issue
Posted by:
Anthony Unger
(---.15.236.249.res-cmts.ovr.ptd.net)
Date: September 27, 2018 11:09AM
Im still desperatly waiting for my first issue to arrive.. Lol i havent been this excited for a magazine since my first issue of fly tyer.. After reading a post or 2 here, i answered a question in a diffrent thread.. Lol Sorry, only registered users may post in this forum.
|