I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

part# for rod lathe belt
Posted by: John Samuels (---.hsd1.va.comcast.net)
Date: September 18, 2018 09:21AM

Can anyone give me the part# off the Gates notched v-belt that came with the Renzetti rod lathe?

Options: ReplyQuote
Re: part# for rod lathe belt
Posted by: Doug Cox (---.rtmc.net)
Date: September 18, 2018 10:52AM

Gates #3M315

Options: ReplyQuote
Re: part# for rod lathe belt
Posted by: John Ricks (---.tukw.qwest.net)
Date: September 18, 2018 11:21AM

Buy two then you will have a spare.

A lesson learned in my machine shop. Spare belts for each piece of machinery. And write the belt number on the machine somewhere!!!! I put the belt numbers inside the belt cover.

Options: ReplyQuote
Re: part# for rod lathe belt
Posted by: roger wilson (---)
Date: September 18, 2018 12:21PM

[www.cnczone.com]

[www.vbeltsupply.com]

[vbeltsdirect.com]

[www.taigtools.com]

[www.royalsupply.com]

--------------
With any item source, be sure to check for the shipping charges to get your total item cost.

If sourcing something that is harder to find, you can often order multiples of the item with no change in shipping charges, if there are any such charges.

Good luck

Options: ReplyQuote
Re: part# for rod lathe belt
Posted by: John Samuels (---.hsd1.va.comcast.net)
Date: September 18, 2018 12:47PM

Thanks everyone ... extras ordered ... # written on Lathe.

Options: ReplyQuote
Re: part# for rod lathe belt
Posted by: roger wilson (---)
Date: September 25, 2018 12:46PM

p.s.
The Gates specification for the #3m315 belt is:

1/8th top width - v belt
Length = 12. 4 inches.

However, note that 12.4 inches = 315mm.

Thus, the Gates specification listing indicates the length of the belt in MM.
The gates listing specification also indicates the width of the top of the belt in MM.

i.e. 3M indicates a top width of 3 milimeters which is also equal to 1/8 of an inch.

315 indicates the belt length of 315 millimeters or 12.4 inches.


So, keep an english to metric conversion table handy and you can quickly visualize the listings on the belt.

Good luck

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster