I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Tip top size
Posted by: Scott Lawrence (---.dyn.iinet.net.au)
Date: September 10, 2018 09:07PM

Hi All,
Soon to order components for a 15kg stroker type rod. Having a look at similar type rods I have they seem to use a 12mm ring for the tip top but the last running guide is a 10mm.Is there a benifit to doing this or is having a 10mm for the tip top ok.Also is there a need for a larger tip top on other rods.I think the benifit may be in getting knots through the tip without catching.As I only ever run a plaited double to a snap swivel it may not matter.Any help or advice much appreciated.
Tight lines Scott.

Options: ReplyQuote
Re: Tip top size
Posted by: Spencer Phipps (---)
Date: September 10, 2018 09:31PM

Many times a 12 is at the tip because they don't make a 10 tip with a big enough tube size for the blank's heavy tip.

Options: ReplyQuote
Re: Tip top size
Posted by: Tom Kirkman (Moderator)
Date: September 11, 2018 07:45AM

If the knot went through 10's on the way out, you don't need a 12 tiptop to clear it. The tiptop needn't be any larger than your smallest running guide.

Sometimes you see odd things with tiptops as builders have to juggle available tiptop ring sizes with the tube sizes they're available in.

There is an alternative - use a standard low frame casting guide and bend the single foot around and underneath the blank tip. This forms a great heavy duty tiptop. Photos were in a past issue of RodMaker. It's something that Ken Preston used to do on his surf rods.

..............

Options: ReplyQuote
Re: Tip top size
Posted by: Robert A. Guist (---.dhcp.embarqhsd.net)
Date: September 11, 2018 04:12PM

Hello All.

There is an article in both the Volume-11 / Issue-2 / Page 16, and the Vol-20 / Issue-5 / Pg-26.

The later being in color, the previous being in Black & White.

The article was penned by Dave Sommer, and named "Saltwater Tip-Top Solution".


Tight Wraps & Tighter Lines.

Bob,

Bridgeton, NC.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster