I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Thread carriages.
Posted by: Fernando Arellano (---.nwrk.east.verizon.net)
Date: August 30, 2018 11:29AM

I'm looking for a multiple thread carriage, to wrap multiple threads at the same time for a decorative butt wrap. Can someone please steer me in the right direction?

Options: ReplyQuote
Re: Thread carriages.
Posted by: Tom Kirkman (Moderator)
Date: August 30, 2018 11:33AM

I typically just hold the threads in my hand, running through my fingers up to 8 threads at a time. I suppose some might do it direct from a thread carriage, however. The Renzetti would likely do it, as would any of the others although they are all limited by the number of spools they can hold.

.............

Options: ReplyQuote
Re: Thread carriages.
Posted by: Jim Upton (---)
Date: August 30, 2018 12:09PM

I think Billy Vivona posted a picture of a thread box he made for that very thing you might look at his gallery and see if it is there or contact him for his suggestions.

Options: ReplyQuote
Re: Thread carriages.
Posted by: Fernando Arellano (---)
Date: August 30, 2018 02:20PM

Hey guys thanks.

Options: ReplyQuote
Re: Thread carriages.
Posted by: Fernando Arellano (---)
Date: August 30, 2018 02:20PM

Hey guys thanks.

Options: ReplyQuote
Re: Thread carriages.
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: August 30, 2018 02:49PM

Check out Doc Ski's facebook page (James Labanowski)



Edited 1 time(s). Last edit at 08/30/2018 09:03PM by Lynn Behler.

Options: ReplyQuote
Re: Thread carriages.
Posted by: Seth Johnson (---.williams.com)
Date: September 05, 2018 10:10AM

I bought a carriage from Hawkeye Custom Fishing Rods


You could also go this route

Holds two
[www.mudhole.com]
Bolts on top to hold two more
[www.mudhole.com]



Edited 1 time(s). Last edit at 09/05/2018 11:21AM by Tom Kirkman.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster