SPONSORS
2024 ICRBE EXPO |
Thread carriages.
Posted by:
Fernando Arellano
(---.nwrk.east.verizon.net)
Date: August 30, 2018 11:29AM
I'm looking for a multiple thread carriage, to wrap multiple threads at the same time for a decorative butt wrap. Can someone please steer me in the right direction? Re: Thread carriages.
Posted by:
Tom Kirkman
(Moderator)
Date: August 30, 2018 11:33AM
I typically just hold the threads in my hand, running through my fingers up to 8 threads at a time. I suppose some might do it direct from a thread carriage, however. The Renzetti would likely do it, as would any of the others although they are all limited by the number of spools they can hold.
............. Re: Thread carriages.
Posted by:
Jim Upton
(---)
Date: August 30, 2018 12:09PM
I think Billy Vivona posted a picture of a thread box he made for that very thing you might look at his gallery and see if it is there or contact him for his suggestions. Re: Thread carriages.
Posted by:
Fernando Arellano
(---)
Date: August 30, 2018 02:20PM
Hey guys thanks. Re: Thread carriages.
Posted by:
Fernando Arellano
(---)
Date: August 30, 2018 02:20PM
Hey guys thanks. Re: Thread carriages.
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: August 30, 2018 02:49PM
Check out Doc Ski's facebook page (James Labanowski) Edited 1 time(s). Last edit at 08/30/2018 09:03PM by Lynn Behler. Re: Thread carriages.
Posted by:
Seth Johnson
(---.williams.com)
Date: September 05, 2018 10:10AM
I bought a carriage from Hawkeye Custom Fishing Rods
You could also go this route Holds two [www.mudhole.com] Bolts on top to hold two more [www.mudhole.com] Edited 1 time(s). Last edit at 09/05/2018 11:21AM by Tom Kirkman. Sorry, only registered users may post in this forum.
|